Showing 21 to 38 of 38 results

  • This is the Narwhal Heavy Weapons Platform. A unison of Mind and AI, that work in together to command overwhelming firepower.

    This kit comes with both a long and short barrel variation, magnetizable pilons for retracted and deployed states, honestly there's so much magnetization in this kit, from the main cannons rotation, to the auxiliary weapons at the front, alternate missile plates at the rear (Full stock/Various fired/and sometime later, *currently firing*) etc.etc.

    Pre-supports by Atlas3DSS and pre-plated files set up by me.

    This one ran another collab with Crucible of Games with an absolutely massive 185mm display base, as well as a couple of 2pi Operators geared out for the Narwhal's cockpit~
    https://www.comicsgamesandthings.com/shop/product/2pi-narwhal-operators-narwhal-hwp-auxilliary-kit/

    I'm just, really jazzed about this one, it was a huge effort but definitely worth it in the end I think~

    Thanks,
    ~Pipes

    Released on Nov. 5, 2021

    $25.00

  • With the successful introduction of the Calappa series drones, development on the 'Koma pattern started almost immediately with the age old question of "What if it were bigger?"

    This is a koi equivalent quad drone that I put together for anyone wanting both a quad mech, and a drone equivalent to the koi. I think this scratches both itches, and has a fair amount of customization, from a handful of heads, to 3 or 4 leg variants, there should be a bit of everything from the koi here. (there's even an adapter that lets you use the lower half of the 'koma, and the upper half of the koi together in Quad mech harmony~
    Supported by the lovely atlas, I didn't preplate this as there are a bunch of optional pieces to choose, and it's overall assembly is fairly straightforward~

    I hope you have fun with this one, I had a good time building mine,
    ~Pipes

    Released on Oct. 1, 2021

    $10.00

  • Every Kaluga pattern Sturgeon is outfitted with an extremely loud external speaker so that it goes *Nyooooom* every time it passes an enemy on the battlefield. Or something like that idk. A highly mobile assault platform, commonly found screaming across the wastes, sublimating the enemy. S'brutal stuff.

    This kit is something I've been waiting to do since I modeled the StarFish. And I'm *very* excited to bring it to you! There's a bunch of optional pieces to tweak, and almost everything is compatible with the previous Beluga and Sturgeon kits. And same as the previous, it has an actual cockpit, that Crucible of games has a pilot figure for: https://www.comicsgamesandthings.com/shop/product/2pi-operators/
    Please look over the instructions, the body is a fairly complicated assembly~

    Files supported by Atlas, and pre-plated by me~ This is also the first kit where I have some pre-posed pieces incase posing isn't your strong suit~

    I really hope you enjoy this one I had a lovely time getting back into it after the hospital mess~

    ~Pipes

    Released on Sept. 3, 2021

    $20.00

  • The Beluga Pattern Sturgeon mech, stalking more towards the rear of the battlefield, raining plasma fire down from the skies. A pinnacle weapon of prototype tech and absolutey "I want that guy over there dead from wayyyy back here" vibes.

    _________________________________

    This is another large scale mech suit based entirely off the original Sturgeon base frame. Like it's sister, the Kaluga Pattern Sturgeon will both be built from the base frame of the original Sturgeon. Unlike the Sturgeon however, while this suit itself doesn't have too many options, everything can be swapped around with the previous Sturgeon kit, and as well as the later Kaluga Pattern Sturgeon.

    Files will be supported by Atlas3DSS but they are currently a bit behind with the Vulcan Kickstarter, so those will be later on in the month.

    The Pilot sculpts are not included and can only be obtained through this months patreon (February 2021) But will be available on Crucible of Games various sites~

    I hope you enjoy this one as much as I did modeling it~

    ~Pipes

    Edit: For anyone looking to get the 2pi Operators, they're now available here: https://www.comicsgamesandthings.com/shop/product/2pi-operators/

    Released on July 3, 2021

    $20.00

  • you better watch out.

    You Better Watch Out.

    YOU BETTER WATCH OUT.

    He's coming. He's Coming. He's Coming.
    _____________________________________________________

    Hey Y'all, I bring to you on this fine morning some rad files for a big sneaky fish. So big in fact that if you want something a little closer to stock I'd recommend printing at 80% scale. (Test printed everything both 100% and 80%) The Sneaky drone does not need to be scaled~

    This is a massive 35+ piece kit that I hope you enjoy as much as I did, I'm very pleased with the end results~

    As always everything is Pre-supported by the lovely Atlas3Dss (And the drones supported by yours truly) The AnglerGeist is Pre-Plated by me for both 2 armed and 4 armed Variants. (the two armed variant will need two of the docked drone files (or undocked I'm not your mom))

    Enjoy!

    ~Pipes

    Released on June 4, 2021

    $15.00

  • Updated 7/5/22
    I've re-worked the shoulder joints to be more in line with the current offerings and added a handful of new pieces/variants to this kit. This file set replaces the older ArcherFishV1.
    ~Pipes

    ------

    Stalking the back of battlefields picking targets off with precision, the ArcherFish class mech packs a small arsenal, from giant cannons to a near endless supply of missiles to dominate from afar.

    This is another large kit with a ton of variable configs and with a bit of scaling, almost all of the bits from the Koi mech will work with this and vice versa. 58 pieces total~.

    As always presupports by the lovely Atlas3DSS and pre-plated set ups arranged by me based on a PhotonS build plate with plenty of extra room~ The two printed pics are what you can assemble off of the 2Arm and 4Arm config pre-plates respectively, and depending on your config, there will be pieces left over. Other optional pieces will need to be added, give the instructions a look over for help~

    Thanks as always for the support,

    ~Pipes

    Released on June 4, 2021

    $16.00

  • Released on June 4, 2021

    $6.00

  • Lil' guppy's swimmin around the tank~ Blastin anything they see with rockets and heavy weapons fire...wait, that's not right...These aren't guppies at all???

    These are the support guppies for the TriggerFish Heavy Grav Tank, as well as general use, mix and match~
    Supported filesets will be available here when I get them back from Atlas.

    ~Pipes

    Released on June 4, 2021

    $5.00

  • And I swear, that fish got in the dandiest little suit, and hopped up out of the tank. Went right on down to the recruiters that day and enlisted.
    _________________________________

    Included in this kit are pieces to make both 2 and 4 armed variants. All on the arm mounts are slotted for 1/16"x1/16" magnets for easy magnetization, no need to choose~
    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 80%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    Thanks,
    ~Pipes

    Released on June 4, 2021

    $9.00

  • hind·sight

    /ˈhīn(d)ˌsīt/ noun

    Understanding of a situation or event only after it has happened or developed.

    "with hindsight, I should never have gone"
    _________________________________

    Included in this multipart kit are pieces to make both 2 and 4 armed variants of C.Hindsight. A large variety of swords and hand placements for all sorts of dynamic poses. Huge amount of variety with this one~

    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ 

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    -Pipes

    Released on June 4, 2021

    $13.00

  • Weaving in and out of the battlefield to a symphony only they can hear, leaving small scale devastation in there wake. Ever graceful, never breaking stride.

    _________________________________

    Hey friends~! Today I bring to the table the Koi Battle Mech. The closest prototype we have to production, and the most numerous~

    This kit has been another fun set to work on, and I think I crammed enough stuff in it to keep you all busy for at least a little bit~ There are so many different ways and configs that this mech can be assembled in, from 2 arm to 4 arm undermount overmount side mount etc. etc.~ I'm very pleased with the final piece and I thin ki've really kinda hit a stride in terms of design~ I really hope you enjoy this one!

    As always presupports by the lovely Atlas3DSS and pre-plated set ups arranged by me based on a PhotonS build plate with plenty of extra room~ The two printed pics are what you can assemble off of the 2Arm and 4Arm config pre-plates respectively, and depending on your config, there will be pieces left over. Other optional pieces will need to be added, give the instructions a look over for help~

    Thanks as always for the support,

    ~Pipes

    EDIT (2/13/22): I have updated the Koi's shoulder joints to be more in line with the current commander kit.
    ~Pipes

    Released on June 4, 2021

    $13.00

  • Lionfish are real pretty, but they pack a nasty sting.
    Did you know that they're also super invasive?
    Really a hazardous fish~

    _________________________________

    While this suit was specifically designed with 4 arms in mind, It can be built with two arms. If you're into that kinda heresy.

    Included in this kit are pieces to make both 2 and 4 armed variants. All on the weapon mounts are slotted for 3mmx1mm (approximate) magnets for easy magnetization, no need to choose~

    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 90-95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    -Pipes

    Released on June 4, 2021

    $13.00

  • Look at this little shrimp, he's so smol. But he also has 4 arms, and two of 'em have huge guns so that makes it ok I guess. Still don't think it could hit the broadside of a barn ;)

    _________________________________

    This is a raw and pre-supported multi-part file set. Also included are pre-plated versions for both the 2 and 4 arm variant base. This one's a simpler model so not much to say about it. It does not have a model for the HYMP. Just the shooty version.

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    ~Pipes

    Released on June 4, 2021

    $9.00

  • Those were the sneakiest fish I ever didn't see. Snuck up and bagged me and my buddy and before we knew it we were half way into the bermuda triangle. Didn't hear a sound from em, quiet as death.

    _________________________________

    Included in this kit are an assortment of pieces pieces to mix and match for a whole squad of individualized mins~ And check back later and I will be adding a four arm option to this kit at a later date.

    As always, all my kits are supported by the lovely Atlas3Dss. With the suit pre-plates set to make you a set of three SilverFish. Two small heads, with a sensor headed leader~ the latter having two weapon options to pick from post print. With the pre-plated files being based on the PhotonS build plate for convenience~ but if you want to do a little more customization, there's a bunch of bits in the kit for that~

    Thanks as always,

    ~Pipes

    Released on June 4, 2021

    $6.00

  • Released on June 4, 2021

    $13.00

  • The humble sturgeon stalking the battlefield. A pinnacle weapon of prototype tech and absolute "I want that guy over there dead" vibes.

    _________________________________

    This particular suit project has been both a labor of love and a fantastic collaboration~ I present the Sturgeon Class Battlesuit. The pinnacle of getting that thing over there dead really good.

    This is a massive Battlesuit kit with a plethora of assembly options and pieces. It can be put together with either a closed or open cockpit, undermounted weaponry, or hand held, armor, or no armor, whatever you'd like~

    Now I collaborated with Crucible of Games on this one and they're the folks that did the little pilot Sculpt you can see at the end. There are a bunch more poses integrated with different pieces of the suit, from being wired in, to standing on the front hatch, to being held up by the hand. So if you haven't looked into crucible of games, please check their patreon out, it has a bunch of cool offerings.

    I'm honestly so excited to finally have the whole thing ready to go, with the usual raw/supported/pre-plated files for convenience. And supported of course by Atlas3DSS (at least the Sturgeon files are)

    The Pilot sculpts are not included and can only be obtained through this months patreon (February 2021) But will be available on Crucible of Games various sites~

    I hope you enjoy this one as much as I did modeling it~

    ~Pipes

    Edit: For anyone looking to get the 2pi Operators, they're now available here: 

    https://www.comicsgamesandthings.com/shop/product/2pi-operators/

    Released on June 4, 2021

    $20.00

  • DAMN BOI. HE THICC.

    That's the thiccest fish I ever did see. Strollin about the battlefield, throwin around his girth, enforcing it's will all over the place. Truly a sight to behold.

    _________________________________

    I had a ton of fun modeling all the bits to this guy, and I hope you enjoy the model too. This kit has a ton of options and weapons to crack into. Perfect for mixing and matching to your hearts content. Make some neat stuff with this one~

    Included in this kit are pieces to make both 2 and 4 armed variants. All on the arm mounts are slotted for 3mm x 1.5mm (approximate) magnets for easy magnetization, no need to choose~

    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    -Pipes

    Released on June 4, 2021

    $13.00

  • This is a multipart kit modeled around the base FishFrame. Along with the other kits all the pieces can be swapped around as needed to fulfil various roles on the battlefield. Almost everything in this kit is magnetized for ease of use.

    Supported by Atlas3DSS and pre-plated by me.

    ~Pipes

    Released on June 4, 2021

    $15.00

Showing 21 to 38 of 38 results

items per page

Show filters