• Not all of Venice is in shining glory. The Rent mostly avoided La Serenissima, but the floods still took their toll, and some parts haven't yet been repaired.

    This kit contains 2 small and 1 medium damaged Street sections. These varied pieces can be used to make a completely ruined Venetian board, or just add a little rough around the edges to your existing set.

    The Small Ruined Streets are made from 3mm MDF. They are great pieces of scenery to use for Carnevale and will work perfectly with other 28-32mm games.

    Models supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $11.20

    Released on May 27, 2022

    $8.96

  • Nothing says "made it" more than a private canal-side entryway into your home. Although nothing says "bad building planning" more than a door that leads straight into the water.

    This set contains 2 small stairs, 2 wide stairs, 2 tiny street blocks, 1 wide tiny street block, and a tiny bridge. They're designed to fit perfectly with the rest of the Venetian Streets sections, adding a safe vertical path into and out of canals, or up and down levels of street sections. The small size of these pieces allows them to be used in all sorts of spaces, giving loads of mobility to otherwise hard-to-access areas of the board.

    The Venetian Canal Street Stairs are made from 3mm MDF. They are great pieces of scenery to use for Carnevale and will work perfectly with other 28-32mm games.

    Models supplied unpainted and require assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $11.20

    Released on May 27, 2022

    $8.96

  • Looking out over the roofs of Venice is like looking at trees in a forest. The chimneys looking up to the stars and billowing smoke out into the sky.

    For those that like a little more detail on their buildings, the Venetian Rooftop Accessories are for you!

    The set contains all manner of chimneys, taken from traditional Venetian designs (yes, even the twisty one). They're small enough to stick onto almost any building, and act as great obstacles for jumping on and freerunning over.

    The set also contains various platforms. These are designed to fit on almost all of the Streets of Venice range, simply clipping onto the horizontal beams on the buildings. They're made to be big enough to support 30mm bases comfortably with very little chance of your lovingly painted miniatures falling to the ground.

    The Venetian Rooftop Accessories contains eight wall platforms, sixteen chimneys, and two moving cranes. Half of the accessories are designed for flat roofs and the other half designed for sloped roofs.

    This kit is made from 3mm MDF and has been designed for Carnevale, with each accessory acting as a handy platform for climbing or a small obstacle for activating your chained jumps, even at rooftop level! It's also a great kit to use with other 28-32mm games, decorating any older style building in interesting and realistic ways.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $11.20

    Released on May 27, 2022

    $8.96

  • Don't fall in!

    This kit contains 30 Venetian Street Railings sections, and a whole bunch of connectors. These railings are fully modular, allowing you to add them to your Venetian Streets sections at the start of every game.

    Using a simple scissor lock design, each railing can be combined with any other, and using the additional connectors the railings can span vast lengths and turn corners with ease. There are even 2 railings that are a little bit longer to sit nicely on the Corner Street sections.

    Once you've clipped them on and played your game, simply pop them off and pack them up for next time!

    The Venetian Street Railings are made from 3mm MDF. They are great pieces of scenery to use for Carnevale (especially to jump onto!) and will work perfectly with other 28-32mm games.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    1 in stock

    MSRP $11.20

    Released on May 27, 2022

    $8.96

  • Backorder

    MSRP $315.00

    Released on May 21, 2022

    $267.75

  • Can those meddling Guild stop running on my roof!

    The Calle al Ponte da Lucca is a beautiful set of 3 buildings that offer a wide magnitude of options to the tabletop. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

    The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

    This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $22.40

    Released on May 21, 2022

    $17.92

  • I was hoping these monsters would have left after destroying my town. But no, they just live among us.

    The Gèto del Pozzo is a once beautiful set of 5 buildings that offer a wide magnitude of options to the table top. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

    The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

    This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $22.40

    Released on May 21, 2022

    $17.92

  • My home was once so beautiful, now it's just a heap of rubble

    The Gèto Rifformati is a once beautiful set of 3 buildings that offer a wide magnitude of options to the table top. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

    The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

    This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $22.40

    Released on May 21, 2022

    $17.92

  • Some say this raucous tavern really comes alive at dusk, but those who live near it know that the sounds of drinking and music never really die down.

    This two storey tavern looks like the architect was drunk when the planning went through, Angular walls and a steep pitched roof look like the building should not stant without external support. Perhaps magic? Perhaps the sheer force of will from the drunks inside, who can tell!

    Each section of this kit can be removed and the interior is fully playable just in case a bar room brawl kicks off. This would make a great centrepiece for any village board, especially combined with other buildings from the range.

    Agatha's Stone Moon Tavern is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $26.60

    Released on May 16, 2022

    $21.28

  • The Bell Tower is made from 3mm MDF, 1mm Greyboard and acrylic. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Backorder

    MSRP $21.00

    Released on May 16, 2022

    $16.80

  • Cosy cottages, brick built with characterful pitched rooves. Could anyone find anywhere more homely?

    The Briar rose cottages are great fantasy houses to fill out a quiant little village on any game board. With a non-standard construction, the walls and rooves are angle to give a more whimsical feel, different from the rest of our fantasy range.

    Each building has a removable roof with a playable interior and the stick on wooden details really give it that three dimension feel and lots of places to really pick out that dry brushing.

    The Briar Rose cottages are made from 3mm MDF, are easy to put together and look great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $16.80

    Released on May 16, 2022

    $13.44

  • Now this is a vantage point! Some say the Wizard that occupies this tower has control of the entire battlefield.

    Captain Bamboozle's Wizard Tower, is an excellent piece of scenery for a table top with it towering over the battlefield it makes for a great strategic location not to mention it's impressive look it will be a real eye catcher.

    Captain Bamboozle's Wizard Tower is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $30.80

    Released on May 16, 2022

    $24.64

  • This Castle Set is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Wargaming . Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. (This item is cut to order)

    Backorder

    MSRP $72.80

    Released on May 16, 2022

    $58.24

  • The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall.

    Each set includes 2 small Deluxe Dungeon Sections.

    The Sections can be placed in any combination.

    Backorder

    MSRP $11.20

    Released on May 16, 2022

    $8.96

  • The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall.

    Each set includes 2 small Deluxe Dungeon Sections.

    The Sections can be placed in any combination.

    Backorder

    MSRP $11.20

    Released on May 16, 2022

    $8.96

  • The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall.

    Each set includes 2 small Deluxe Dungeon Sections.

    The Sections can be placed in any combination.

    Backorder

    MSRP $11.20

    Released on May 16, 2022

    $8.96

  • The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall.

    Each set includes 2 small Deluxe Dungeon Sections.

    The Sections can be placed in any combination.

    Backorder

    MSRP $11.20

    Released on May 16, 2022

    $8.96

  • The Deluxe Dungeon Set is made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall. The Sections can be placed in any combination.

    The Deluxe Dungeon Set includes:

    • 2 x Straight Sections
    • 2 x Corner Sections
    • 2 x Crossroad Sections
    • 2 x T-Junction Sections
    • 1 x Large Straight Section
    • 1 x Large Corner Section
    • 1 x Large Crossroad Section
    • 1 x Large T-Junction Section
    • A selection of accessories, including;
      • 1 x Bed,
      • 1 x Torture Rack,
      • 1 x Round Table,
      • 4 x Chairs,
      • 1 x Shelves,
      • 1 x Bookshelf,
      • 1 x Sarcophagus,
      • 2 x Candelabras,
      • 1 x Large Bench,
      • 2 x Small Benches,
      • 1 x Iron Maiden,
      • 1 x Trapdoor,
      • 1 x Vent,
      • 1 x Small Box,
      • 1 x Large Box,
      • 1 x Executioners Block.

    Backorder

    MSRP $61.60

    Released on May 16, 2022

    $55.00

  • The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall.

    Each set includes 1 Large Dungeon Section.

    All Variants can be used together in any layout

    Backorder

    MSRP $11.13

    Released on May 16, 2022

    $8.90

  • The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    Each square is 25mm scale. Walls are 4.5cm tall.

    Each set includes 1 Large Dungeon Section.

    All Variants can be used together in any layout 

    Backorder

    MSRP $11.13

    Released on May 16, 2022

    $8.90

Showing 81 to 100 of 220 results

items per page

Show filters