• A set of five Feral Orcs!

    Released on June 24, 2021

    $14.95

  • MSRP $10.95

    Released on June 17, 2021

    $10.95

  • When the Star Pharaohs are on a Hexcite crystal recovery mission, they take care not to too heavily damage the prize, which is why they minimize destructive power when they are too near the precious crystal hoard. But sometimes superior firepower is a must, and that is when the Apocalypse Walkers come out in force. The Apocalypse Cannon makes short work of heavily entrenched armor, and its Khopesh Blasters levels any approaching infantry. Looming high over the troops, the Apocalypse Walker truly encapsulates the phrase, "Death from Above."

    Released on June 17, 2021

    $5.99

  • Not all Star Pharaohs are on board with the Hexan's purported plans to free their subjects from programmatic captivity. The Annihilators are a caste of Star Pharaohs who are openly suspicious of the motives of their divine crystalline rulers, and express their frustration with their state of affairs by modifying their bodies for maximum annihilation of alien life rather than for practical applications - so they cannot be used in any of the Hexan's plans. Skittering across the battlefield on three legs, the ferocious Triskelion Annihilators express their loathing for their doomed, ever-captive programming routines via giant swings of terrible and deadly Hexphase blades into the hated alien enemy.

    Surprisingly, this state of affairs is fine by the ruling classes of the Star Pharaohs, as even a mad dog can be a friend when directed at one's enemies.

    Released on June 15, 2021

    $4.99

  • Released on June 9, 2021

    $7.50

  • Drifting through space, sometimes under power, sometimes not. This mighty mass of rock and derelict vessels soars through space (or drifts, whichever) until it comes to its destination. That being anywhere there is a chance for WAAAAGH!!! This mammoth has so many crashed vessels.... so many. And a Star Fort centering it all!!!! The Abomination is supported, but the files are very large and cumbersome. Once this is resolved, the supported files will be put here. For now, there are the .lys that you can use with lychee.

    MSRP $20.00

    Released on June 9, 2021

    $20.00

  • While making some more Privateer stuff I realized that there was a little something missing.... some options.... This is what happened. There are new and fun bays in this pack like Plasma Batteries and the like. There are also Half Bays so you can completely trick out your ride. And the best part? They all have a hole in the back for a 2x1mm disk magnet. And you know what that means.. watch out for upgraded hulls added to past releases with matching magnet holes.

    MSRP $7.50

    Released on June 8, 2021

    $7.50

  • Superbly detailed 28mm/30mm scale model kit conversion parts
    Compatible with Redemptor Dreadnought plastic kits (except Easy-to-Build).

    Kit contains:
    1x Pair of Shoulder Pads (one with tendril attachment)
    1x Pair of MechaTendrils
    1x Torso insert
    1x Torso armour plate
     
    IMPORTANT NOTE: You will require a regular Redemptor Dreadnought plastic kit (not supplied) to use this upgrade pack.

    MSRP $7.95

    Released on June 6, 2021

    $7.95

  • you better watch out.

    You Better Watch Out.

    YOU BETTER WATCH OUT.

    He's coming. He's Coming. He's Coming.
    _____________________________________________________

    Hey Y'all, I bring to you on this fine morning some rad files for a big sneaky fish. So big in fact that if you want something a little closer to stock I'd recommend printing at 80% scale. (Test printed everything both 100% and 80%) The Sneaky drone does not need to be scaled~

    This is a massive 35+ piece kit that I hope you enjoy as much as I did, I'm very pleased with the end results~

    As always everything is Pre-supported by the lovely Atlas3Dss (And the drones supported by yours truly) The AnglerGeist is Pre-Plated by me for both 2 armed and 4 armed Variants. (the two armed variant will need two of the docked drone files (or undocked I'm not your mom))

    Enjoy!

    ~Pipes

    Released on June 4, 2021

    $15.00

  • Stalking the back of battlefields picking targets off with precision, the ArcherFish class mech packs a small arsenal, from giant cannons to a near endless supply of missiles to dominate from afar.

    This is another large kit with a ton of variable configs and with a bit of scaling, almost all of the bits from the Koi mech will work with this and vice versa. 58 pieces total~.

    As always presupports by the lovely Atlas3DSS and pre-plated set ups arranged by me based on a PhotonS build plate with plenty of extra room~ The two printed pics are what you can assemble off of the 2Arm and 4Arm config pre-plates respectively, and depending on your config, there will be pieces left over. Other optional pieces will need to be added, give the instructions a look over for help~

    Thanks as always for the support,

    ~Pipes

    Released on June 4, 2021

    $13.00

  • A 3D printable file of a circular base with large brick texture. These bases can be printed in resin but are fast and cheap when printed in FDM, and the texture is noticeable in either material.

    Released on June 4, 2021

    $1.50 $1.25

  • A 3D printable file of a square base with large brick texture.

    Released on June 4, 2021

    $1.50 $1.25

  • Released on June 4, 2021

    $9.00

  • Lil' guppy's swimmin around the tank~ Blastin anything they see with rockets and heavy weapons fire...wait, that's not right...These aren't guppies at all???

    These are the support guppies for the TriggerFish Heavy Grav Tank, as well as general use, mix and match~
    Supported filesets will be available here when I get them back from Atlas.

    ~Pipes

    Released on June 4, 2021

    $5.00

  • And I swear, that fish got in the dandiest little suit, and hopped up out of the tank. Went right on down to the recruiters that day and enlisted.
    _________________________________

    Included in this kit are pieces to make both 2 and 4 armed variants. All on the arm mounts are slotted for 1/16"x1/16" magnets for easy magnetization, no need to choose~
    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 80%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    Thanks,
    ~Pipes

    Released on June 4, 2021

    $9.00

  • hind·sight

    /ˈhīn(d)ˌsīt/ noun

    Understanding of a situation or event only after it has happened or developed.

    "with hindsight, I should never have gone"
    _________________________________

    Included in this multipart kit are pieces to make both 2 and 4 armed variants of C.Hindsight. A large variety of swords and hand placements for all sorts of dynamic poses. Huge amount of variety with this one~

    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ 

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    -Pipes

    Released on June 4, 2021

    $13.00

  • Weaving in and out of the battlefield to a symphony only they can hear, leaving small scale devastation in there wake. Ever graceful, never breaking stride.

    _________________________________

    Hey friends~! Today I bring to the table the Koi Battle Mech. The closest prototype we have to production, and the most numerous~

    This kit has been another fun set to work on, and I think I crammed enough stuff in it to keep you all busy for at least a little bit~ There are so many different ways and configs that this mech can be assembled in, from 2 arm to 4 arm undermount overmount side mount etc. etc.~ I'm very pleased with the final piece and I thin ki've really kinda hit a stride in terms of design~ I really hope you enjoy this one!

    As always presupports by the lovely Atlas3DSS and pre-plated set ups arranged by me based on a PhotonS build plate with plenty of extra room~ The two printed pics are what you can assemble off of the 2Arm and 4Arm config pre-plates respectively, and depending on your config, there will be pieces left over. Other optional pieces will need to be added, give the instructions a look over for help~

    Thanks as always for the support,

    ~Pipes

    Released on June 4, 2021

    $13.00

  • Lionfish are real pretty, but they pack a nasty sting.
    Did you know that they're also super invasive?
    Really a hazardous fish~

    _________________________________

    While this suit was specifically designed with 4 arms in mind, It can be built with two arms. If you're into that kinda heresy.

    Included in this kit are pieces to make both 2 and 4 armed variants. All on the weapon mounts are slotted for 3mmx1mm (approximate) magnets for easy magnetization, no need to choose~

    As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 90-95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    -Pipes

    Released on June 4, 2021

    $13.00

  • Look at this little shrimp, he's so smol. But he also has 4 arms, and two of 'em have huge guns so that makes it ok I guess. Still don't think it could hit the broadside of a barn ;)

    _________________________________

    This is a raw and pre-supported multi-part file set. Also included are pre-plated versions for both the 2 and 4 arm variant base. This one's a simpler model so not much to say about it. It does not have a model for the HYMP. Just the shooty version.

    As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

    ~Pipes

    Released on June 4, 2021

    $9.00

  • Those were the sneakiest fish I ever didn't see. Snuck up and bagged me and my buddy and before we knew it we were half way into the bermuda triangle. Didn't hear a sound from em, quiet as death.

    _________________________________

    Included in this kit are an assortment of pieces pieces to mix and match for a whole squad of individualized mins~ And check back later and I will be adding a four arm option to this kit at a later date.

    As always, all my kits are supported by the lovely Atlas3Dss. With the suit pre-plates set to make you a set of three SilverFish. Two small heads, with a sensor headed leader~ the latter having two weapon options to pick from post print. With the pre-plated files being based on the PhotonS build plate for convenience~ but if you want to do a little more customization, there's a bunch of bits in the kit for that~

    Thanks as always,

    ~Pipes

    Released on June 4, 2021

    $6.00

Showing 81 to 100 of 356 results

items per page

Show filters