Showing 101 to 120 of 993 results

  • 1 Orc on a bike

    MSRP $5.00

    Released on Sept. 1, 2022

    $5.00

  • Orc biker

    MSRP $5.00

    Released on Sept. 1, 2022

    $5.00

  • Just when the galaxy thought the Greenskin menace could not get any worse, this immense piece of greenskin madness enters the sector. This dreadnought sized Glory Class vessel is built for doing some damage. This is a multi part kit for easy printing and painting. An assembly guide and readme are included. Don't leave for the WAAAGH! without this flagship. Kulghaz the conqueror rode this to that little planet that has all the wars and has never regretted it. Supported files are being hand crafted by Mountain 3D Supports and will be included once complete.

    MSRP $20.00

    Released on Sept. 1, 2022

    $20.00 $10.00

  • multipart, modular infantry builder. presupported for resin. many weapon options!

    Released on Sept. 1, 2022

    $8.50 $5.95

  • The Borealis Light Cruiser is another incredible tool in the Pirate Elves arsenal. Armed with a mighty prow armament and torpedoes, this vessel is ready to take on the challenge of stealing from the rich and giving it to themselves. The Borealis kit is a multi part kit that comes with multiple options for Prow, Hull, Top and Bottom wings. The options allow you to build a ship that will show off the origins of those who sail it. The supported files are being created by Mountain 3D Supports and will be included once complete.

    MSRP $7.50

    Released on Sept. 1, 2022

    $7.50 $3.75

  • The Pirate Elves are here to stay. The escorts have forged a path and now the Solarium Light Cruiser arrives to shore up the beach head. This is a multi part kit with options to give this ship an Artisanal or Edgy look. Supported files are being crafted by Mountain 3D Supports and will be added when complete.

    MSRP $7.50

    Released on Sept. 1, 2022

    $7.50 $3.75

  • Released on Sept. 1, 2022

    $4.10

  • The Space Bugs Cruiser builder is a multi part kit that that will allow you to build some very hungry ships prepared to harvest any kind of biological matter. When the space faring races in the universe are ready to be eaten and are too resistant to being eaten, then you need the power of this cruiser. The supported files are being created by Mountain 3D Supports and will be included once complete.

    MSRP $10.00

    Released on Sept. 1, 2022

    $10.00 $5.00

  • The Space Colonists Green Shuttle in 1/400 scale is a orbital drop shuttle with room for two giant mecha. This is the shuttle from the Space Colonists Green Cruiser, just bigger and more detailed! While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

    Notes:
    The Green Shuttle comes in a few assembly options: solid, split and hollowed, and split with opened engines and an open mecha bay. At 1/400 scale, I can fit either half just barely on my original Mars 1, and if you increase the size to 1/144, each half would just barely fit in a Jupiter! So scale carefully, my friends.

    If you'd prefer 1:144 in FDM, the Komusai is split into 7 parts that should print quite nicely on any Ender 3 sized printer.

    Released on Sept. 1, 2022

    $10.00

  • The Space Colonists Red Carrier in 1/3000 scale is a dedicated carrier ship with heavy firepower to back it up. With two triple beam cannons, a huge array of CIWS, and hangar space for up to 8 mecha in the forward bay, this carrier comes ready to battle. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

    Notes:
    The Red Carrier comes in with a main hull and separate turret guns in two elevations (0° and 10°). The turret guns and mounting points have magnet holes pre-cut into the files (3mm x 2mm, or 1/8" x 1/16"). The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 2 assembled ships on my original Mars 1, and if you increase the size to 1/1700 it just barely won't fit the Mars 1, but it does fit my Proxima 6.0, so happy printing!

    Released on Sept. 1, 2022

    $10.00

  • DISCLAIMER: Some pieces on this kit fit a bit tightly initially and require a little bit of work to mesh properly. This is mostly with the interaction between the engines and body joint and a few of the wing inserts, some light sanding, or in the engine's case, a few rotations will clear out the slot~

    That said, the StoneFish multi-role flier is a multi part vehicle kit to assemble various versions in a bomber or fighter config as well as accompanying escort drones.
    PreSupported by Atlas3DSS and the base is preplated by me.
    ~Pipes

    Released on Sept. 1, 2022

    $14.00

  • Released on Sept. 1, 2022

    $5.00 $3.50

  • Released on Sept. 1, 2022

    $8.50 $5.95

  • A series of bits to convert your popular 28-32mm Science Fiction mechanized Contemptuous Walking Coffin Robots to UN Space Force Dread Mecha, the Spartan. Some have taken to calling it a Dread'Mech, an Archer. This set comes with closed missile shoulder covers, replacement legs (separate thigh, shin, and foot, articulated), and replacement arms (compatible with kit arm connectors, open and closed fists). All parts are side specific, so mirror all parts that you want two of. All parts come pre-supported.

    Released on Sept. 1, 2022

    $10.00

  • mono-pose model with 7 variations, presupported for printing in resin

    Released on Sept. 1, 2022

    $5.00 $3.50

  • Demon Ladies with 17 Different Head options, 8 bodies and one Tuba playing musician!

    Released on Sept. 1, 2022

    $18.00

  • This pack comes with over 50 parts to make any number of infantry proxies for your favorite table top games. The set comes with 3 different head options, several different styles of guns, torso with back pack and without and an addon flight pack. If your Sept need some human Auxilia, this is the kit for you.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    An updated body for the Missile Drone has been included due to a flaw found in the missile connection point. Please use the files included in the Updated Infantry Support Missile Drone zip file.

    Released on Sept. 1, 2022

    $7.00

  • Description incoming (again)
    (Sorry).
    Supported files include.

    MSRP $5.99

    Released on Aug. 31, 2022

    $6.99

  • Have you ever experienced road rage - ever need to exact vengeance when racing across a desolate plain?

    Now you can - with style....


    The Dakka is the new Vehicle from Bulwark Industries - With a top mount dakka - with the capability of MOAR DAKKA

    ( maybe never enough dakka)*






    Patreon model of the month for - AUG and SEPT (I'm on hols in sept)
    Pateons get 35% off older models

    JIM



    Released on Aug. 30, 2022

    $16.00

  • This kit contains 3 squads and acompanying HQ units. One squad with bucklers and swords, a second with boarding shields and axes and a third heavy armour squad with shields and chainfists. The four different HQ captains come with various weaponry. Each model comes with an alternate styled version of their weapon/shield. All come with both knight and spaceman helmets. Comes presupported.

    Released on Aug. 19, 2022

    $5.00

Showing 101 to 120 of 993 results

items per page

Show filters