Showing 121 to 140 of 729 results

  • Orbital Knight Heavy Weapons Kit - 7 different weapons, in 4 different poses, both shoulder mounted and underslung, with both helmet options for over 100 unique models.

    Released on March 1, 2022

    $10.00

  • Orbital Knights Specialist Weapons Kit - 4 different specialist squad weapons, 12 different poses, with both helmet options over 90 unique models.

    Released on March 1, 2022

    $10.00

  • Spider Tanks are not just for animes and fish people now. This Spider Tank has filled it's chamber with souls and has been heavily defiled.

    This model is an extremely poseable multipart kit that will allow you to make endless action scenes. All parts are pre-supported and tested multiple times for your convenience.

    I hope you enjoy it as much as I enjoyed making it. Please show me your paint jobs once you are done.

    Files come in Lychee supported files noted a .lys. Supported stl files are noted with the supported word at the end of the file name. All other files are unsupported. If you use another slicer other than Lychee, please note that the larger parts need to be hollowed and that you will have to use your software's hole tools to make appropriate drain holes for the models in order for the resin to escape. I highly recommend the use of the Lychee slicer software. Even the free version will open the .lys files and works extremely well.

    Released on March 1, 2022

    $10.00

  • This is the main kit for the majority of the Support Drones used by the army.

    Kit includes:
    2 Bodies
    Grav-Inhibitor
    Pulse Accelerator
    Guardian
    Shield
    Missile
    Gun
    Markerlight
    Side Plug
    2 Bottom Plug Options
    3 Flight Stands
    3 Small Flying Bases with stands
    2 extra fins

    All files are presupported for your convenience.

    MSRP $8.50

    Released on March 1, 2022

    $8.50

  • Five Orcs with Rockets!

    Released on March 1, 2022

    $10.00

  • A second set of Tank Killers!

    Released on March 1, 2022

    $10.00

  • Released on March 1, 2022

    $8.50 $7.00

  • 8 models with and without arms, presupported for resin

    MSRP $5.00

    Released on March 1, 2022

    $5.00 $4.12

  • Multipart modular vehicle, presupported for resin.

    MSRP $12.75

    Released on March 1, 2022

    $12.75 $10.51

  • These Vanguard Droids are your lightweight scouts. Perfectly equipped with Carbines and Marking Lasers to quietly remove unsuspecting enemies and mark targets for the harder hitting parts of the army. Also equipped with Railrifles and an Ioncannon for taking out the occasional hard target.

    Kit comes with:
    10 Torsos with weapons attached
    9 Leg poses
    8 Heads
    Various loose weapons and accessories to outfit bases or add more bulk to your Droids

    All files are presupported for your convenience.

    MSRP $10.00

    Released on March 1, 2022

    $10.00

  • Imperial transports, based upon late 19th/early 20th Century warships. Bulk hauler and two types of tank, plain and supported files. These are small transport sized, so about 42 mm in length.

    Please note that you are not able to sell prints of these files nor redistribute them. These models are not official OPR models and are not recognised by OPR.

    MSRP $9,999.00

    Released on March 1, 2022

    $999.00

  • An Ancient Elfdar Transport based upon the ancient concept sketches for Space Fleet.

    These will proxy in BFG for a standard transport.

    Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

    Released on Feb. 28, 2022

    $999.00

  • No army in the Galaxy is without the need to scout forward positions and assess the front lines. The Star Pharaohs are no exception, and the Sickle Riders are their high speed strike force suited to this task.

    Released on Feb. 24, 2022

    $4.99

  • The 40mm Scale Storage Building is a quick vasemode print terrain feature for your games such as MCP and others, that includes removable trays for storage of your MCP tokens dice and tactic cards. Made using FDM vase mode techniques to reduce printing time to just a few hours and with minimal filament usage. Kit includes all of the parts necessary to make the model shown in the pictures as well as two alternate faces for your building, and the Cura profile necessary to slice your files.

    Check our my other VMT models like the townhouse in the picture, on my patreon or my stores https://linktr.ee/leesedrenfort or https://www.patreon.com/LeesedRenfort

    This model is to be printed in vase mode / spiralize contour mode with the orientation as the models are provided.
    This model has been test printed with a 1.0 mm nozzle and a layer height of 0.12 mm or less.
    Make sure to check your printing preview in cura after slicing, sometimes cura skips a layer or two when slicing in vase mode. If this happens just rotate the model a few degrees around the z-axis and slice again until its fine.
    cura profile for an ender3 is also included in the download.
    This models should print without supports flat on the build-plate with an FDM printer with a 1.0 nozzle in spiralize mode.
    Models are scaled for 40mm gaming or also known as O gauge / 1:48 scale. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.
    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on Feb. 21, 2022

    $4.00

  • These Armoured ladz - tougher, smarter - and fighty'er than regular Bulorks

    (print whole models 85% to be a good proxy)





    ACTIVE PATRONS GET 35% OFF - WAAAAGH ON

    Released on Feb. 17, 2022

    $10.00

  • This kit contains Orbital Knights with boarding shields and a variety of weapons, including squad leaders and specialists in a number of poses.
    All Orbital Knight kits have 2 different helmet options (knight and space). Comes both with and without attached bases and supported versions as well.

    Released on Feb. 15, 2022

    $8.00

  • Orbital Knight Kit3 contains troops riding combat bikes with a variety of weapons, including close assault, specialist rifles, squad leaders and heavy support bikes.

    All Orbital Knight kits have 2 different helmet options (knight and space). Comes with supported versions as well.

    Released on Feb. 15, 2022

    $10.00

  • Files come presupported!

    This kit comes with 7 different body types, which can all be mirrored for 14 different base body types! You also have 3 weapon options if you want to give your Cultists some firepower, and each weapon has 7 unique poses which can also be mirror for 14 weapon poses! If you want your cultists to be a bit more...stabby... you also have melee weapon options as well! This kit also comes with 7 different head options that work across all models! You've got lots of options and lots of variety!

    Released on Feb. 3, 2022

    $10.00

  • (Do not try to download this all at once, it will fail. (Probably))
    (Do not repair the files with Lychee it will cause bits to not print. Lychee really doesn't like the legs for whatever reason. I've test printed everything in lychee without reparing the files and beenn 100% fine in doing so.)
    These are the Goby Frame infantry drones. (FireFish Goby and TigerGoby variants) My answer to not being able to model organics. There's 100+ bits and oh so many combinations. A little bit more pre-posed then my usual stuff but at this scale it's what makes the most sense. (there's a fileset of the pieces separate (T-Pose) so they can be posed and exported in something like blender if you need something a bit more custom) and as always, two and four arm variants.
    The undermount pieces are slotted for a 1mm magnet but at this scale they might need to drilled out a bit to fit. I haven't tested that as I don't personally intend to magnetize them

    I really hope you enjoy this take on a fully mechanized infaantry unit, I actually had a pretty good time making it~
    ~Pipes

    Released on Feb. 2, 2022

    $12.00

  • The Abyssal Wyvern is a combination of mechana parts and the bones of an elder beast fused together with infernal powers to create a thing that should not exist. It takes flight on tattered wings and burns it's enemies alive as it passes overhead.

    This model is perfectly scaled to fit your favorite tabletop games, and I have even made a couple of base options you can use for free that you can find here.

    https://www.thingiverse.com/thing:5206309

    https://www.thingiverse.com/thing:5206300

    This model is an extremely poseable multipart kit that will allow you to make endless action scenes. All parts are pre-supported and tested multiple times for your convenience.

    I hope you enjoy it as much as I enjoyed making it. Please show me your paint jobs once you are done.

    Released on Feb. 1, 2022

    $10.00

Showing 121 to 140 of 729 results

items per page

Show filters