Showing 1 to 20 of 47 results

  • The Autonomous Spider Drone is a multipart kit containing 3 different leg and arm styles to allow you to make some very dynamic poses for your tabletop armies.

    All parts are pre-supported, test printed and include Lychee files. Test prints done on my Photon Mono X that is regularly maintained and tuned. Supports are for your convenience only, and may need to be adjusted for your printer type, choice of resin, environment, and printer maintenance.

    These models are not meant to be shared or resold without the express permission of the designer. Any resale or sharing of these files are expressly forbidden.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular desires.

    Released on Jan. 1, 2023

    $1.50

  • The Mermaid Battlesuit is a great command suit scaled model, perfect for your 2pi tabletop armies. The suit comes with part to allow you to make the Mermaid suit either with it's bit shield or bit armor on. This macha is very details and extremely posable, with many tiny parts.

    All parts are pre-supported, test printed and include Lychee files. Test prints done on my Photon Mono X that is regularly maintained and tuned. Supports are for your convenience only, and may need to be adjusted for your printer type, choice of resin, environment, and printer maintenance.

    These models are not meant to be shared or resold without the express permission of the designer. Any resale or sharing of these files are expressly forbidden.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular desires

    Released on Jan. 1, 2023

    $6.00

  • Merry Christmas! Show your mecha love on the Christmas tree this year with this fun battle suit to guard your presents!

    Released on Dec. 3, 2022

    $2.00

  • The Federation Psycho Battle Suit is a second generation suit mainly used in an artillery role on the battle field. Equipped with many weapons on its body, it can also be equipped with a mega bazooka that sports rockets and missiles for even more impact. This model stands approximately 6 inches tall and has an extreme number of articulation points and optional parts for limitless poses. Launchers on it's back and wrist joints can be left un-glued, allowing you to open and close the launchers and swap out hand poses as you see fit.

    All parts are pre-supported and include Lychee files.

    These models are not meant to be shared or resold without the express permission of the designer. Any resale or sharing of these files are expressly forbidden.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular desires.

    Released on Dec. 1, 2022

    $9.50

  • 2pi/Oz Battle Suits are another faction of the 2pi forces. This kit comes with all the parts necessary to make 3 different styles of command suits, and many different combination of Grunt ground and space forces as well as Electronic Warfare variants. This is an extremely complex kit with many different optional parts, with which you can make limitless poses and battle scenes. Perfect for your tabletop wargames.

    All parts are pre-supported and include Lychee files.

    These models are not meant to be shared or resold without the express permission of the designer. Any resale or sharing of these files are expressly forbidden.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular desires.

    Released on Nov. 1, 2022

    $7.50

  • The Federation Enclave's Missile Drones are extremely adaptable and capable of even defending the Mobile Suits they are assigned to with powerful shield generators, just like the ones on their smaller cousins. This set comes with all the parts necessary to assemble Missile Ball Drones with their weapons Open or Closed and even in the process of launch, with optional arm styles to give your drones some variety on the battlefield including Shield Generator arms to make a Shielded Missile Drone Proxy. Drones may be mounted on standard miniature flight stands via a predesigned 1/8 inch hole in the bottom of the model.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on Oct. 1, 2022

    $3.00

  • The War Dog Heavy Battle Suit stands over 5 inches tall and is a perfect proxy for heavily armed elite battle suits in your favorite tabletop games. This set comes with 36 parts to make two variations and endless Poses for your Battle suits.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on Oct. 1, 2022

    $9.00

  • This pack comes with over 50 parts to make any number of infantry proxies for your favorite table top games. The set comes with 3 different head options, several different styles of guns, torso with back pack and without and an addon flight pack. If your Sept need some human Auxilia, this is the kit for you.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    An updated body for the Missile Drone has been included due to a flaw found in the missile connection point. Please use the files included in the Updated Infantry Support Missile Drone zip file.

    Released on Sept. 1, 2022

    $7.00

  • One of the most elaborate kits we have made until now. 91 parts in all. This kit will provide all the parts necessary to make tons of battle suit styles and sports a new articulation point on the upper arms for even more dynamic poses.

    All parts are pre-supported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Released on Aug. 1, 2022

    $7.00

  • The new Sniper Ball to joins the growing arsenal of Autonomous Ball Drones. This kit comes with all parts necessary to make the part shown with posable arms and turret, as well as the Ze'on Sept Moa Operator to help it find its targets.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on July 1, 2022

    $3.00

  • The Ze'on Sept Ramba suit will give your Ze'on forces a great command suit to lead the battle. And remember "This is not regular battle suit boy!" This kit can be made as a standard combat suit of an upgraded flight suit and comes with tons of shields and weapon options to make any combination you want.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on July 1, 2022

    $6.00

  • The Federation Enclave has a huge selection of Autonomous weapons and this is just three of the most common versions used by the different groups of their military. This set comes with all the parts necessary to assemble three different styles of Autonomous Ball Drones, (Dual Gun Drone, Protective Shield Drone, and the Target Acquisition Drone) with optional arm styles to give your drones some variety on the battlefield. Drones may be mounted on standard miniature flight stands via a predesigned 1/8 inch hole in the bottom of the model.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on June 1, 2022

    $3.00

  • The Heavy Battle Suit is a perfect proxy for command battle suits or heavily armed elite battle suits in your favorite tabletop games. This set comes with 54 parts to make near endless variations of the Heavy Battle Suit and is extremely posable.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on June 1, 2022

    $6.00

  • The First Federation Enclave Suit to be released is a perfect proxy for your high speed commander battle suits in your favorite table top games. This kit comes with tons of options and is highly posable. This kit contains 48 parts for near limitless combinations and includes a 60mm scenic base to show off your commander on the battlefield.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $6.00

    Released on May 1, 2022

    $6.00

  • These smaller suits are perfect proxies for your favorite table top sneaky battle suit units. Kit comes with 27 different parts to allow almost endless combinations of poses. Provided with both arm and backpack mounted weapons to suit your personal taste.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $4.00

    Released on May 1, 2022

    $4.00

  • The forces of the Ze'on sept will soon bring their weapons to war, and not for any good greater than their own. This multi part poseable battle suit model kit will fill your needs for any crisis, no matter it's role. Parts are scaled to fit standard tabletop anime style battle suits and fit well on a standard 50mm bases as shown in the pics. This kit comes with 54 parts that can be mixed and matched for different mecha styles and weapon loadouts. 7 different types of guns in hand or back mount styles, plus melee knuckledusters and more.

    Released on April 1, 2022

    $7.00

  • The Challengers are members of the Daughters of Wolves that have failed a challenge of some kind and have to earn their right to fight along side their sisters once more. These six models are scaled to fit your favorite table top games and includes a separate sword file to serve your kit bashing needs. This kit is released as part of the welcome pack for 2022 on our Patreon, and the range will be expanded every few months to include more Daughters.

    Released on March 9, 2022

    $5.00

  • Spider Tanks are not just for animes and fish people now. This Spider Tank has filled it's chamber with souls and has been heavily defiled.

    This model is an extremely poseable multipart kit that will allow you to make endless action scenes. All parts are pre-supported and tested multiple times for your convenience.

    I hope you enjoy it as much as I enjoyed making it. Please show me your paint jobs once you are done.

    Files come in Lychee supported files noted a .lys. Supported stl files are noted with the supported word at the end of the file name. All other files are unsupported. If you use another slicer other than Lychee, please note that the larger parts need to be hollowed and that you will have to use your software's hole tools to make appropriate drain holes for the models in order for the resin to escape. I highly recommend the use of the Lychee slicer software. Even the free version will open the .lys files and works extremely well.

    Released on March 1, 2022

    $10.00

  • The 40mm Scale Storage Building is a quick vasemode print terrain feature for your games such as MCP and others, that includes removable trays for storage of your MCP tokens dice and tactic cards. Made using FDM vase mode techniques to reduce printing time to just a few hours and with minimal filament usage. Kit includes all of the parts necessary to make the model shown in the pictures as well as two alternate faces for your building, and the Cura profile necessary to slice your files.

    Check our my other VMT models like the townhouse in the picture, on my patreon or my stores https://linktr.ee/leesedrenfort or https://www.patreon.com/LeesedRenfort

    This model is to be printed in vase mode / spiralize contour mode with the orientation as the models are provided.
    This model has been test printed with a 1.0 mm nozzle and a layer height of 0.12 mm or less.
    Make sure to check your printing preview in cura after slicing, sometimes cura skips a layer or two when slicing in vase mode. If this happens just rotate the model a few degrees around the z-axis and slice again until its fine.
    cura profile for an ender3 is also included in the download.
    This models should print without supports flat on the build-plate with an FDM printer with a 1.0 nozzle in spiralize mode.
    Models are scaled for 40mm gaming or also known as O gauge / 1:48 scale. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.
    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on Feb. 21, 2022

    $4.00

  • The Abyssal Wyvern is a combination of mechana parts and the bones of an elder beast fused together with infernal powers to create a thing that should not exist. It takes flight on tattered wings and burns it's enemies alive as it passes overhead.

    This model is perfectly scaled to fit your favorite tabletop games, and I have even made a couple of base options you can use for free that you can find here.

    https://www.thingiverse.com/thing:5206309

    https://www.thingiverse.com/thing:5206300

    This model is an extremely poseable multipart kit that will allow you to make endless action scenes. All parts are pre-supported and tested multiple times for your convenience.

    I hope you enjoy it as much as I enjoyed making it. Please show me your paint jobs once you are done.

    Released on Feb. 1, 2022

    $10.00

Showing 1 to 20 of 47 results

items per page

Show filters